Parts

Designed specifically for the Ritchey WCS Carbon Fork, this compression device secures the stem and headset for any fork with a carbon steerer. - Compression plug for carbon 1-1/8" steerers - Top cap fits 1-1/8" stems

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

Crucial for dialing-in fit, Ritchey 2x bars help get your hands in just the right position for the best ride performance on your mountain bike. - Material: double-butted 6061 alloy - Width: 740mm - Backsweep: 9° - Rise: reversible +/- 5mm flat rise - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 276g

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

The Ritchey Comp EVA bar tape is soft and comfortable while providing a true road feel.

Tom Ritchey has been riding off-road and riding far – and designing products for such adventures - decades before anyone thought to call it “gravel riding” or “bikepacking.” His real-life experiences directly inform every product made by Ritchey – such as the beloved VentureMax handlebar. With its short reach, shallow drop and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Like its predecessor, the new generation Comp VentureMax is influenced by those life experiences, but some adds new features – continuing to inspire riders to chase gravel and other mixed surface adventures. Aero-shaped 38x22.5mm ergonomic tops offer a more comfortable hand position, while drilling for a Shimano EW-RS910 junction box expands the adaptability of the WCS VentureMax. Multiple hand positions are key for comfort and confidence on any ride, and the WCS VentureMax offers plenty of options there – especially with its wide 24-degree flare at the drops. But it’s the return of the Bio-bend in the drop that adds yet another design element that is practical and comfortable for whatever surface you choose to ride upon and for however long your adventure endures. The flattened 38x22.5mm top section provides a comfortable area for resting hands Compatible with Shimano EW-RS910 junction box Width is measured at the initial bend rather than at the hood

Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible

Replacement compression knobs for RockShox suspension forks.

3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.

7 Series Disc Brake Pads - Race compound offers maximum stopping power for those who push their materials to the limits

8 Series Disc Brake Pads - Disconnected two piece back plate - Race compound offers maximum stopping power for those who push their materials to the limits - Set of four disc brake pads for one MT5, MT7 Caliper

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

Replacement guard for the Halfbash sprocket.

With the perfect balance of robustness and weight savings, the SRAM XX Eagle T-Type AXS™ Transmission Power Meter groupset has the strength to handle big enduro days with the weight to make it manageable. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. - AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls - Engineered as integrated, interdependent transmission components, the XX Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface - XX T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleurs - Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link - To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged - Shifting under load is made possible on the XX T-Type 10-52t cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output - XX Eagle AXS™ T-Type crankset utilizes SRAM's World stage proven XX carbon crankarm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit - The "DUB-PWR” is a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself and boasts a long battery life

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

With quick lever access and a light and responsive lever action, Rapidfire Plus SLX shift lever delivers smooth control out on the trail. The new I-SPEC EV lever offers a wide range of adjustments including increased lever slide range. - Instantaneous push and pull movements - 20% quicker main lever access and -35% shifting operation force (vs SL-M7000-IR) - Adjust to the optimal position for any riding style or rider preference with clean cockpit - Rider tunable

- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Replacement parts for Paul rim brakes.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

RockShox Rear Shock Parts

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

- SRAM's cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible - Range: 10-50T - Speed: 12 - Cassette Weight: 300g - Cog Details: 10-12-14-16-18-21-24-28-32-36-42-50 - Cassette Spider Material: Steel - Cog Material: Steel/Aluminum

A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.