Seatposts

- Alloy seatpost with alloy bracket - Length: 400mm - 20mm offset

WCS 1-Bolt mast topper for round ISP, compatible with 1-Bolt alloy clamp kits. - Material: 2014 alloy - Saddle clamp: sold separately - Seat collar torque: 5Nm (max) - Color: high-polish black

The Pure Cycles seatpost is a no frills no nonsense seatpost perfect for a basic replacement.

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft. - 3D forged and CNC machined AL6066 w/ alloy head - Directionally butted for low weight and additional strength - Chromoly hardware - Clamp Style: Standard Rails

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.

Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy

The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

This replacement seatpost for the Shiv Disc ensures the perfect fit with two different setback options— 0mm and 25mm. - Aerodynamic FACT carbon construction that's compatible with the Shiv Disc. - Profile that integrates with the shape of the rear Hydration Fuelcell for maximum aerodynamic performance. - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Setback: 0/+25mm

This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. - FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6. - Engineered to have the saddle move in a perfect arc, aka a back & downward motion. - Setback: 20mm/0mm - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Length: 380mm/450mm - Approximate Weight: 209g

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately

We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

BSD Seatposts

The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)

- PIVOTAL Compatible - Ultra-light 6061 forged alloy construction - Reinforced wall construction - Setback: 0mm

- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined

Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.

ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop. - 395 grams (can be trimmed for an additional 40 grams in weight savings) - Mechanical actuation - Internal Routing Only - 40mm of drop/travel - 350mm length (Min Post Height: 140mm seat post clamps saddle rail - 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts) - Fully serviceable, no special tools required - Compatible with all cable actuated remote levers

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

#901 7/8 top 10" x 1" - Seat Post Diameter: 13/16'' - Seat Post Length: 15.5'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel

- XC - Gravel - Trail focused post - Two-position simplicity - Featherweight - Cable routes in either direction for compatibility with any dropper lever - Zero offset - 352g

- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 31.6mm - Travel: 200mm - Cable Routing: Internal

Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

Sunday Bikes pivotal seatpost.

Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack position—all while remaining feather light at 180g for XC riding and racing. Its 30.9mm post diameter and 415mm length make the Control SL seat post a perfect match for the modern XC bike. Once your riding position is set, you’re focus is dialed on ride fast and efficiently —not your seat post. - Material: High-modulus carbon fiber - Length: 415mm - Offset: 0mm - Post Diameter: 30.9mm - Seat Clamp: 2-bolt Micro Adjust with 46mm saddle rail cradle, Compatible with carbon and alloy saddle rails - Bolts: Titanium - Weight: 180g - System Weight Limit: 275lbs / 125kg

Now available with the iconic high-polish silver finish, the Ritchey Classic Zero seatpost features the same Zero post head and zero setback as the original Zero post. Inspired by life, built to last, and providing a classy aesthetic, the Classic Zero offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're cruising along rough gravel roads, remounting after running a section of slop on the 'cross course, ripping some sublime singletrack, or out on an epic road ride, the Classic Zero seatpost keeps your saddle exactly where you want it. - Material: 6061 alloy - Offset: zero - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified for seatpost—follow frame/seat binder specification - Weight: 290g (27.2 x 400mm)

- PIVOTAL compatible - Polished stainless steel shaft - Durable and weather resistant finish - Reinforced shaft design for strength - Outer Diameter: 25.4mm - Length: 250mm - Setback: 0mm

FSA's Metropolis seatpost is CNC machined from AL6069 aluminum and features a forged alloy single-bolt head with chromoly hardware. Simple and elegant, this seatpost gets the job done weighing a scant 257 grams.

• Forged alloy construction • Single top bolt adjustment

- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal

The all-new Highline XC/Gravel delivers infinite adjustment, smooth feel, and easy installation. - 27.2mm seatpost diameter to fit most XC and gravel bikes - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick-connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Drop Bar Remote sold separately

The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal